Cooling Tower Technologies : New Zealand Fluid Coolers, Condensers & Evaporative Cooling Towers

1. Fibreglass interior for easy cleaning. The internal surfaces of the tower including basin, cased wall and the fan cylinder are moulded gelcoat. This gives a glasslike finish to help ensure that cleaning is quick and easy.

2. Five year warranty on fibreglass shell. UV-stabilised materials are designed for constant water contact, sun, hot/cold air temperature extremes. Thick wall sections assure structural integrity and long service life.

3. Pumps are easy to access and clean, with good positive suction heads.

4. Access panel and anti-splash louvres are easy to remove.

5. Low operating costs due to the M-series condensers and coolers' efficient design. For example, fan cylinder inlet and large plan area keep internal static down, ensuring low operational power consumption. Motors are rated to IP56 for outdoor moist air extremes found in cooling tower applications.

6. Superior air inlet louvres help prevent 'splash out'. Louvres are removable for access to basin for cleaning purposes and also prevent larger air-borne debris from entering the system. The air inlet louvres are constructed of corrosion resistant PVC and they completely enclose the basin. With the reduction of sunlight into the cold water basin, the potential for algae growth is substantially reduced, helping keep water treatment and maintenance costs to a minimum.

7. Attractive aesthetic design. Careful attention is paid to the external appearance of our units, recognising that most installations are highly visible. The unit's clean, orderly design fit into almost any manufacturing, industrial or air conditioning location. Optional custom colours are also available.

8. Structural tower base is suitable for mounting and bolting down and is rated for various earthquake zones.

9. Eliminators are easy to access.

10. The water distribution system is PVC and is easy to inspect, and if required, the laterals can be removed for cleaning. With positive threaded nozzles, no problems will be encountered with these being dislodged due to poor maintenance and ensure that high pressure surges do not displace the nozzle. Low inlet pressure is all that is required for efficient water coverage.

M-Series INDUSTRIAL COOLERS & CONDENSERS - features & benefits

Click on image parts for details

Checking water distribution and nozzles operation is easy.

Quick and easy cleaning of sumps in large units.

	Designed around the New Zealand Standard. MEC evaporative condensers and MFC fluid coolers were designed and built to conform to NZS 3666.

	On-going maintenance costs are reduced.

	Basin edges are rounded and sloped to drain, to ensure easy sludge removal.

	High efficiency fans and blades M-series evaporative condensers and coolers utilise all aluminium or fibreglass low noise fans, with low kilowatt requirement. The majority of the models are furnished with adjustable pitch blades.

	Mechanical equipment. Where they are utilised, mechanical components, such as bearings and belts are designed for heavy and continuous industrial duty to assure long life. All belt drive units are supplied with extended lubrication gears as standard. Gearbox drives are available as an additonal feature.

	Thermal guarantee. All Aqua-Cool products are thermally guaranteed to perform in their selected field environment. Selection of our M-series condensers and coolers is based on many years of extensive field experience. Our design engineers have sized all units with consideration to varying opertaing conditions which can have significant effect on thermal performance.

	Eliminators. Constructed form PVC, the efficient drift eliminators remove entrained water droplets from the air stream to limit drift rate to less than 0.001%. With the advantage of efficient drift eliminators, our towers can be installed near sensitive areas. The eliminators are light and easy to remove. Eliminator shape and structural integrity is maintained due to the utilisation of a unique end cap design.

	Basin is easily accessible for cleaning, no need for personnel to enter confined space to clean basin.

	Positive thread nozzles are easy to remove for cleaning.

	Water loss minimised. Highly engineered drift eliminators and air inlet louvres combine to save water.

	Easy site installation. The plan area requirements of the range are generally less than that needed by comparable units. The efficient counterflow design which introduces air from all four sides provides greater heat transfer within a given plan area - minimising space requirements. Units can be transported either partially factory assembled or for full site assembly.

	Interior protected from sunlight. Interior areas such as the coil surface area are protected from exposure to direct sunlight. This helps prevent algae growth and on-going maintenance problems.

MSS COOLING TOWERS • M-Series INDUSTRIAL COOLERS & CONDENSERS • HOME

© Heat Transfer New Zealand Ltd - PO Box 10404, Te Rapa, Hamilton
Phone: 07 850 1644 Fax: 07 850 6445 Mobile: 0274 792 512 - info@heattransfer.co.nz