 |
Designed
around the New Zealand Standard. The MSS range of cooling towers
were designed and built to conform to NZS 3666 and has independent
government verification of compliance to this standard. |
| |
|
|
On-going maintenance
costs are reduced. |
| |
|
|
Basin edges are rounded and
graded to drain, to ensure easy cleaning. |
| |
|
|
High efficiency fans and blades
The MSS range utilises all aluminium or fibreglass low noise
fans, with low kilowatt requirement. All of the models are furnished
with adjustable pitch blades. |
| |
|
|
Mechanical equipment. Where
they are utilised, mechanical components, such as bearings and
belts are designed for heavy and continuous industrial duty
to assure long life. All belt drive units are supplied with
extended lubrication gears as standard. Gearbox drives are available
as an additonal feature. |
| |
|
|
Thermal guarantee. All Aqua-Cool
products are thermally guaranteed to perform in their selected
field environment. Selection of our MSS cooling towers range
is based on many years of extensive field experience. |
| |
|
|
Eliminators. Constructed form
PVC, the efficient drift eliminators remove entrained water
droplets from the air stream to limit drift rate to less than
0.001%. With the advantage of efficient drift eliminators, our
towers can be installed near sensitive areas. The eliminators
are light and easy to remove. Eliminator shape and structural
integrity is maintained due to the utilisation of a unique end
cap design. |
| |
|
|
High efficiency fill, with
low pressure drop ensures optimum performance. The fill is situated
above the water basin. When the tower is not operating, the
fill drains and is left generally dry. With many crossflow towers,
part of the fill remains continously underwater, even during
period when not operating. Fill comes in sections that are easy
to handle and clean. |
| |
|
|
Basin is easily accessible
for cleaning, no need for personnel to enter confined space
to clean basin, or remove fill or eliminators for access. |
| |
|
|
Positive thread nozzles are
easy to remove for cleaning. Eliminators are not disturbed during
routine maintenance and cleaning. |
| |
|
|
Water loss minimised. Uniquely
engineered drift eliminators and air inlet louvres combine to
save water and maintain dry area around cell. |
| |
|
|
Easy site installation. The
plan area requirements of the range are generally less than
that needed by comparable crossflow cooling towers. The efficient
counterflow design which introduces air from all four sides
provides greater heat transfer within a given plan area - minimising
space requirements. Units can be transported either partially
factory assembled or for full site assembly. |
| |
|
|
Interior protected from sunlight.
Interior areas are protected from exposure to direct sunlight.
This helps prevent algae growth and on-going maintenance problems. |
